Designed to be the industry's most economical RF wireless transmitter, Powercast has lowered the barrier to entry where RF wireless power can actually become ubiquitous with multiple RF transmitters covering every home. Ubiquity will be on display in Powercast's booth #52311 at the Venetian Expo in the Smart Home Marketplace during CES 2023 in Las Vegas, January 5 – 8, 2023.
"Powercast's vision is to see a low-cost RF transmitter in every room in every house," says Charles Goetz, CEO at Powercast. "Much like Wi-Fi routers, a home will need multiple RF transmitters to provide enough RF coverage where convenient, contactless, 'set it and forget it' wireless charging becomes a reality. So, we slashed costs and are sharing our Ubiquity design via a reference design with a low $5 bill of material cost, or an embeddable module, that lets manufacturers easily incorporate RF transmitting capability into their own products to accelerate RF transmitter networks in homes."
Powercast's over-the-air wireless power architecture has two sides: 1) a transmitter sends RF over the air, and 2) a receiver embedded in end devices harvests that RF from the air and converts it into DC (direct current) to both communicate data, and power devices.
On the transmitter side, Powercast's Ubiquity will come in several forms, all able to both charge RF-enabled devices and communicate data back and forth with them throughout a home.
Manufacturers have two options to turn their own products – such as home appliances, TVs, game systems, computer monitors or AI-enabled home assistants – into Ubiquity RF transmitters:
- A licensable reference design provides flexibility and ultimate cost savings for manufacturers to integrate just the electronics needed onto their own circuit boards for $5 or less bill-of-material (BOM) cost.
- An easy-to-integrate, drop-in embeddable module contains all the electronics and hardware needed. Manufacturers will add a power supply and antenna. Powercast will work with manufacturers on an antenna design that best fits their specific product size.
Powercast also created a standalone Ubiquity transmitter combining its embeddable module with an antenna to show at CES. Powercast will produce this portable-speaker-sized transmitter.
On the receiving side, manufacturers can embed Powercast's tiny Powerharvester PCC110 receiver chip and a small antenna into their end devices for around $1 to enable them to work with an RF transmitter – either Powercast's standalone Ubiquity, or RF-transmitting products created using the Ubiquity embeddable module or reference design.
This wireless power-over-distance architecture is perfect for charging low-power devices with continuous, reliable, background trickle charging. End device examples include TV remotes, electric toothbrushes, keyboards and mice, game controllers, earbuds, headphones, smart watches, fitness bands, hearing aids, clocks, electric shavers, home automation devices and many more devices.
"The volumes are in the consumer electronics market, but it's also price sensitive. In response to these manufacturers' requests for a sustainable, ultra-low-cost wireless charging solution, our engineers perfected the highly-efficient, single-antenna Ubiquity design that can both transmit power and communicate data. Manufacturers can create environmentally-friendly, RF-powered ecosystems using either rechargeable batteries or no batteries, both of which eliminate disposable battery e-waste and battery replacement hassles," explains Powercast's Director of Research and Development Jason Gill.
The Ubiquity transmitter can output up to 1W (3W EIRP) and automatically charges multiple RF-enabled devices that come into its charging zone – no charging mats needed. Power-hungry devices charge faster within several feet of the transmitter, while ultra-low-power devices like IoT sensors can charge up to 120 feet.
"The far-field wireless power transmitter semiconductor market will soon see a steep growth trajectory with most revenue coming from the consumer market," adds Phil Solis, research director at IDC. "On the receiver side, the consumer market will be the largest segment by 2024 and the vast majority of revenue by 2025. Low-cost solutions are necessary to enable the many devices in the home that can benefit from wireless power."
The licensable Ubiquity reference design is expected in February 2023. The Ubiquity module and transmitter are expected in June 2023.
Representing the living room and bathroom of the future, at CES 2023 (Booth #52311) Powercast will demo a distributed network of Ubiquity RF transmitters that keep RF-enabled devices working throughout the home. Devices include electric toothbrushes, TV remotes, game controllers, automatic faucets, smart home sensors (water leak, plant moister, thermostats), wall clocks, smart speakers, and more.
"RF technology enables a fundamental change in the way our bathroom works," says Charles Greene, Ph.D., COO and CTO of Powercast. "One transmitter charges all low-power devices like toothbrushes and shavers. RF-powered products eliminate cords around water and hence the chance for electric shock. RF also eliminates the inconveniences of the electric toothbrush – no more dock to accumulate grime, and no more need for batteries that often corrode from water seeping in."
Since its founding in 2003, Powercast has led the industry in RF wireless power-over-distance innovations that meet FCC and other global standards. Powercast's technologies eliminate or reduce the need for wires and batteries, working at distances of 120 feet. The company's expertise in all aspects of product design, has resulted in dozens of applications, extensive commercial success in both industrial and consumer applications, and over 10 million units shipped. With more than 100 customers and partner companies globally, Powercast leads the RF wireless power market with 79 early and fundamental patents worldwide, and 23 patents pending.
www.powercastco.com/ces-2023/
www.powercastco.com
