All items in category Electronics Corner

PCI Express Clock Jitter Measurement Tool from Silicon Labs Simplifies Timing Design

December 4, 2015 by audioXpress Staff

PCI Express Clock Jitter Measurement Tool from Silicon Labs Simplifies Timing Design

Silicon Labs has introduced a free software tool to quickly and easily measure PCI Express (PCIe) clock jitter from an oscilloscope data file in just a few simple clicks, making it easy to verify PCIe specification compliance and reduce system development time. Silicon Labs’ jitter measurement tool for PCIe technology is available to developers now.

TDK Introduces Electric Double-Layer Capacitor so thin it fits in a Smart Card

November 27, 2015 by audioXpress Staff

TDK Introduces Electric Double-Layer Capacitor so thin it fits in a Smart Card

TDK Corporation announced the release of an ultra-thin, high-energy capacitor suitable for powering devices such as electronic paper displays, advanced biometric authentication or, simple displays in wireless headphones. The 5 mF electric double-layer capacitor has a maximum thickness of just 0.45 mm and, when fully charged, provides around 50 mJ of energy to power a load.

Economical 3GHz RF Signal Generator Series for Designers Involved in Wireless Technology from Saelig

November 17, 2015 by audioXpress Staff

Economical 3GHz RF Signal Generator Series for Designers Involved in Wireless Technology from Saelig

Saelig has announced the availability of Rigol DSG800 RF Signal Generators, with output frequencies from 9kHz to 3.0GHz, providing a clean and stable RF output with low phase noise and high amplitude accuracy, and all of the functions of other high-level RF signal generators at much lower cost. Designed for electronics designers involved in wireless technology, Wi-Fi, electronics educators, EMC/EMI engineers, and amateur radio enthusiasts.

Microchip Releases Next-Generation Bluetooth LE 4.2 Compliant Solutions

November 5, 2015 by audioXpress Staff

Microchip Releases Next-Generation Bluetooth LE 4.2 Compliant Solutions

Microchip Technology announced its next-generation Bluetooth Low Energy (LE) solutions with compliant silicon, modules and software. Qualified to the latest Bluetooth 4.2 standard, the IS1870 and IS1871 Bluetooth LE RF ICs, along with the BM70 module, expand Microchip’s existing Bluetooth portfolio and carry both worldwide regulatory and Bluetooth Special Interest Group (SIG) certifications.

Freescale Runs Thread and Bluetooth Smart from a Single Wireless MCU

October 20, 2015 by Joao Martins

Freescale Runs Thread and Bluetooth Smart from a Single Wireless MCU

Freescale Semiconductor introduced the new Kinetis KW41Z – the industry’s first multi-mode radio MCU to support concurrent operation of IEEE 802.15.4 Thread and Bluetooth Smart/BLE connectivity while hosting associated applications. With Bluetooth v4.2 support, the Kinetis KW41Z MCU helps transform simple devices into advanced connected systems.

Intel-Powered Arduino Development Board Offers Advanced Features for Next Generation Innovations

October 19, 2015 by audioXpress Staff

Intel-Powered Arduino Development Board Offers Advanced Features for Next Generation Innovations

The new Arduino-compatible platform Arduino/Genuino 101 presented by Intel during the 2015 Rome Maker Faire features an accelerometer, gyroscope and Bluetooth Smart connectivity to enable the development of connected devices. With a form factor identical to the popular Arduino Uno and based on Intel’s low-power Curie platform the board is set to retail for $30 and will be available in the first quarter of 2016.

Tektronix Keithley 2281S Is First to Emulate Battery Performance from Full Charge to Total Discharge

October 6, 2015 by audioXpress Staff

Tektronix Keithley 2281S Is First to Emulate Battery Performance from Full Charge to Total Discharge

Tektronix unveiled its innovative Keithley 2281S Battery Simulator/precision DC Power supply to shorten design and test cycles for mobile devices. The new battery simulator from Tektronix uses a battery model that includes state of charge, amp-hour capacity, equivalent series resistance, and open circuit voltage.

Keysight Helps Engineers Verify, Debug Devices that Use Type-C Connector Technology

October 1, 2015 by audioXpress Staff

Keysight Helps Engineers Verify, Debug Devices that Use Type-C Connector Technology

Responding to an increasing market demand for fast development of USB 3.1 Gen 2 designs and designs using other high-speed signal standards that support the Type-C connector, Keysight Technologies introduced its N7015A high-speed test fixture, which the company says it’s the industry’s highest-signal-integrity Type-C test solution for high-speed differential bus probing.

LabNation Compact Open Source USB Oscilloscope Supports Apple iPad, Android, Microsoft Windows and Linux

September 24, 2015 by audioXpress Staff

LabNation Compact Open Source USB Oscilloscope Supports Apple iPad, Android, Microsoft Windows and Linux

Belgian company LabNation announced the launch of its open source USB oscilloscope, SmartScope. The lightweight device supports all PC and mobile operating systems and is powered directly from the host’s USB interface making it ideal for many test and measurement applications far from the workbench.

Diodes Enables Cost-Effective Headset Detection with Low Power IC in Miniature Package

September 24, 2015 by audioXpress Staff

Diodes Enables Cost-Effective Headset Detection with Low Power IC in Miniature Package

Discrete, logic and analog semiconductor specialist Diodes has introduced a raft of new ICs for consumer electronics and networks, together with new voltage converters and regulators targeting a range of interesting applications for the audio industry. The new AZV5001 headset detection IC is particularly interesting.

«
1
2
...
40
41
42
43
44
45
46
47
48
49
»