All items tagged with smart speakers and test and measurement (14)

HEAD acoustics Increases Audio Measurement and Analysis Flexibility with ACQUA 5.0.100 Software

January 17, 2022 by Joao Martins

HEAD acoustics Increases Audio Measurement and Analysis Flexibility with ACQUA 5.0.100 Software

ACQUA 5.0.100 is the first iteration of the new generation of the well-established measurement and analysis software ACQUA from HEAD acoustics. ACQUA's significantly reworked software structure provides even greater flexibility for voice and audio quality evaluation, while paving the way for future expansions. Designed for the requirements in applications as diverse as communication systems, Bluetooth, ANC headphones, or smart speakers, ACQUA now supports faster hardware configuration, perceived loudness analysis, and MDAQS audio quality evaluation.

Practical Test & Measurement: Testing Smart Devices

February 4, 2020 by Steve Temme

Practical Test & Measurement: Testing Smart Devices

Voice applications are currently fostering the largest growth in the audio industry. This article addresses the challenges and solutions for testing the wider class of “smart” – connected, voice-activated, and sensor-equipped – devices, proposing solutions to implement basic acoustic tests and real-world tests of greater complexity. This article was originally published in audioXpress, April 2019.

Brüel & Kjær Recommendations for Smart Speaker Testing

February 3, 2020 by audioXpress Staff

Brüel & Kjær Recommendations for Smart Speaker Testing

Brüel & Kjær Sound & Vibration Measurement is promoting a set of recommendations for smart speaker testing, putting focus on the importance of realistic testing when developing and incorporating voice recognition functionalities into consumer products. The Danish sound and vibration specialist recommends the use of its high-frequency HATS Type 5218 and Mouth Simulator Type 4227 systems with human voice characteristics for realistic speech and sound testing of voice-operated devices.

What You Need To Know About Smart Speaker Acoustic Measurements

August 28, 2019 by audioXpress Staff

What You Need To Know About Smart Speaker Acoustic Measurements

Smart speakers are a relatively new class of consumer audio device with unique characteristics that make testing their audio performance difficult. In this new application note, Audio Precision provides an overview of smart speaker acoustic measurements with a focus on frequency response – the most important objective measurement of a device’s audio quality.

Practical Test & Measurement: The Smart Way of Testing Smart Home Devices

June 12, 2019 by Hans W. Gierlich

Practical Test & Measurement: The Smart Way of Testing Smart Home Devices

In this article for audioXpress, Hans W. Gierlich, managing director of HEAD acoustics, explains how to test the different performance parameters of smart speakers and smart home devices under real-life conditions, how to deal with the challenges of optimizing systems for voice and audio quality, how to simulate environmental conditions, user behavior, and test the performance of the various functionalities. This article was originally published in audioXpress, January 2019.

NTi Audio Announces Smart Measurements for Smart Devices Using the Flexus FX100 Audio Analyzer

December 18, 2018 by audioXpress Staff

NTi Audio Announces Smart Measurements for Smart Devices Using the Flexus FX100 Audio Analyzer

Responding to the challenges that were brought to the audio industry by the sweeping popularity of connected speakers and smart home devices, Swiss test and measurement specialist NTi Audio just announced an open loop test solution for its FX100 Audio Analyzer system and produced a tutorial using an Amazon Echo Dot device to demonstrate how to test the device's loudspeaker and microphone array using an open loop configuration test sequence.

HEAD acoustics Announces Fully Automated Testing of Voice-Controlled Smart Home Devices

December 13, 2018 by audioXpress Staff

HEAD acoustics Announces Fully Automated Testing of Voice-Controlled Smart Home Devices

With HQS-SmartHome the measurement technology specialist HEAD acoustics provides a new tool for testing communication and audio quality of voice-controlled smart home devices. The database for the ACQUA analysis system contains efficient test series for analyzing and optimizing smart speakers, speakerphones and conferencing devices. HQS-SmartHome (HEAD acoustics Quality Standard) offers a wide range of realistic and reproducible measurements and simulations for research and development phase up to production.

Listen Releases SoundCheck 16.1 with New Frequency Trigger for Open Loop Testing

October 5, 2018 by audioXpress Staff

Listen Releases SoundCheck 16.1 with New Frequency Trigger for Open Loop Testing

The audio measurement specialists at Listen announced the release of SoundCheck 16.1. This minor software release contains nevertheless some exciting new features for all developers and manufacturers working with connected audio devices, providing a test routine for smart speakers and other voice-controlled devices such as smartphones, robots, automotive audio, smart thermostats, hearables and more. The new software is available free of charge to all registered users of SoundCheck 16.0.

New Listen Seminars in Boston and Chicago on Testing Smart Speakers, Voice Controlled Devices, Automotive Audio and More

June 12, 2018 by audioXpress Staff

New Listen Seminars in Boston and Chicago on Testing Smart Speakers, Voice Controlled Devices, Automotive Audio and More

Smarter Measurements for Smarter Speakers is the motto for the recent series of free seminars promoted by Listen Inc, detailing the latest routines for measurement of smart speakers, robots, automotive audio, smart home controls, and much more. Arriving to Addison (Chicago area), IL, Jul 18, and Waltham (Boston area), MA, Jul 20. Essential knowledge for all audio professionals wanting to keep up to date on dealing with the latest market trends.

Audio Precision Announces APx Audio Software v4.6 with Chirp-Based Measurements for Smart Device Testing

May 24, 2018 by Joao Martins

Audio Precision Announces APx Audio Software v4.6 with Chirp-Based Measurements for Smart Device Testing

Audio Precision announced the release of APx audio measurement software version 4.6, with a first public demonstration planned for the 144th International AES Convention in Milan. Included in this latest edition of the popular test software will be the ability to perform measurements using the log-swept sine chirp — such as acoustic response — in an open-loop configuration, an enhancement ideally suited to the test and evaluation of smart devices (e.g., smart speakers, smartphones).

«
1
2
»