You can DIY! The F5 Power Amplifier

In 2008, Nelson Pass submitted an article on its new F5 power amplifier design to audioXpress. At the time, he wrote: “I feel that it’s important to support AudioXpress, a magazine with which I have a 35 year history, and which also serves as a mainstay for the DIY community. Lately they have kindly printed projects that I had already posted on the web, but I decided that they deserve a little better than that.” Effectively, the F5 project was published in May 2008 and had a huge impact on the global DIY community and certainly contributed for the fact that audioXpress is still around today.

Stuart Yaniger wrote a great article for audioXpress in February 2009, The ImPasse Preamplifier, describing a tube preamp to drive a pair of Nelson Pass’ First Watt F4’s (or other low-to-unity-gain power amplifiers) in balanced mono. Yaniger’s preamp is truly an elegant design with very, very low distortion, using a 6SN7 to drive a 6922 in balanced mode. There are LED’s, NE2H neon lamps and depletion MOSFETs in the design.

Three audio experts discuss the role of distortion levels in what we hear. The debate was caused by an article titled “Amplifier Musicality - A Study of Amplifier Harmonic Distortion Spectrum Analysis” by Jean Hiraga, which originated comments by Jan Didden, Dennis Colin and a subsequent response by Jean Hiraga. The original article appeared in audioXpress March 2004 and the resulting conversation was published in audioXpress October 2005.

Here’s a simple, safe, inexpensive project for beginners and those who wish to “try tubes.” Meanwhile the project has been tried, tested, approved and improved, become one of the classic DIY audio projects from the author. This article was originally published in audioXpress magazine, November 2002.

Here’s a do-it-yourselfer’s dream in tube amp design: four operating modes, high quality, low cost, and low distortion. An article originally published by audioXpress in May 2007. A true versatile project which we think deserves to be shared.

With a little know-how and some basic parts, you can design a hybrid amplifier in fairly short order. This project combines the best attributes of both tube and transistor technologies.