From the Vault: The Borbely Preamp

"Designing a preamp is probably the most challenging engineering task in the audio chain, and many designers have invested a lot of time and effort in it," wrote Erno Borbely in this original 1985 article for the Audio Amateur. "My reason for designing this preamp is quite simple: I wanted to have a top-quality preamp without paying megabucks for a Levinson or Accuphase unit. It is up to you to decide whether or not I have succeeded in achieving the same quality." This article was originally published in The Audio Amateur Issue 4, 1985, and is still frequently referenced.

This article continues the classic JFETs series of articles by Erno Borbely and introduces one of his starter kits with an all-JFET line amp. Originally published in audioXpress March 2005 this is an essential reading to understand the “building blocks” of the “Borbely amplifiers”.

The basic circuits on which Erno Borbely based most of his projects are described in “JFETs: The New Frontiers, Part I and II,” published in Audio Electronics AE 5/99 and 6/99, and “All-FET Line Amp,” published in audioXpress May 2002. As the author admits, these were the “building blocks” on which many - if not all - of his amplifiers are based. This articles continues his JFETs series and was originally published in Audio Electronics, Vol 5 1999.

The basic circuits on which Erno Borbely based most of his projects are described in “JFETs: The New Frontiers, Part I and II,” published in Audio Electronics AE 5/99 and 6/99. Referring to these articles frequently, the author admits, these were the “building blocks” on which many - if not all - of his amplifiers are based. This article is the first part, as originally published in Audio Electronics, Vol. 5 1999.