NTi XL3 Acoustic Analyzer Now Supports STIPA Speech Intelligibility Measurements

July 11 2024, 01:10
NTi Audio continues to expand the possibilities of its XL3 handheld acoustic analyzer and sound level meter. The XL3 now supports speech intelligibility measurements according to the IEC60268-16 STIPA international standard. Together with NTi's TalkBox (acoustic) and MR-PRO (electrical) signal sources, the XL3 is now an ideal tool for efficient and reliable STIPA measurement tasks, allowing the measured values to be conveniently visualized in a report.
 

STIPA (Speech Transmission Index for Public Address Systems) measurements are carried out to evaluate the speech intelligibility of public address systems in different environments. Typically, STIPA measurements are performed in conference rooms and classrooms, on public transport announcement systems, at theaters, sports stadiums, hospitals and many more. If a public address system is designed for safety-related emergency announcements, the minimum requirement for STIPA values must be demonstrated by measurement and documentation.

The STIPA test signal is fed, either acoustically or electrically, into the sound system. The STIPA values are then recorded with the XL3 at various points in the public area of interest. The measured values are displayed numerically and classified.
A significant factor for speech intelligibility is the presence of background noise. As it is often not convenient to play the STIPA test signal during typical operating times (e.g. a theater full of people), the XL3 Acoustic Analyzer allows background noise levels to be recorded while the location is full, and STIPA measurements to be recorded separately, when the location is vacated. These measurements can then be combined later.

The averaging of multiple measurements at one point is supported by a dedicated screen. Here the user retains the collected information about the individual measurements and the deviations between them. Invalid measurements can be disregarded immediately. With the STIPA Reporting Tool, which is available free of charge, the measurements at several positions can then be conveniently summarized in a measurement report.

More information and useful tips on how to carry out STIPA measurements is available here.

The STIPA function is available on the XL3 from firmware V1.36. As an alternative to a permanent license, there is also a 365-day version for XL3 users. Firmware V1.36 is available to download free of charge for all XL3 devices.
www.nti-audio.com
 
Page description
About Joao Martins
Since 2013, Joao Martins leads audioXpress as editor-in-chief of the US-based magazine and website, the leading audio electronics, audio product development and design publication, working also as international editor for Voice Coil, the leading periodical for... Read more

related items