USB-C connectors with USB PD provide up to 100W and are widely being adopted in automobiles, smartphones, laptops and peripherals, and tablets. This combination makes USB-C connectors ideal to serve as a universal power adapter standard that eliminates the need for manufacturers to produce customized chargers — enabling the convenience of reusing chargers for electronic devices such as IoT devices, smart speakers, power tools, electric shavers, drones and other rechargeable devices.
The Cypress EZ-PD BCR controller offers a high level of integration in a small footprint package that minimizes bill-of-material cost and simplifies designs, enabling developers to quickly convert their products to be powered via a USB-C connector with few external components and no firmware required. Cypress accelerates the transition to USB-C connectors with the new EZ-PD BCR Kit, which enables product developers to quickly prototype without requiring firmware development.
“Using USB-C with Power Delivery as the universal power adapter solution makes sense across the board,” says Ajay Srikrishna, Vice President of Cypress’ Wired Connectivity Business Unit. “For consumers, having one charger for multiple devices is much more convenient. For manufacturers, using our Barrel Connector Replacement solution to quickly prototype USB PD charging and eliminate the need to ship a custom charger with your product provides cost savings over the long haul. And, of course, the world as a whole benefits from the reduction of e-waste by maximizing the re-use and sharing of a universal charger for multiple devices.”
The EZ-PD BCR Kit enables product developers to quickly prototype the conversion of their products from a conventional power adapter to USB PD in three steps:
- One, select a commercially available USB PD power adapter that supports the desired power profile;
- Two, set up the desired USB PD power profile with the EZ-PD BCR Kit and quickly prototype with no firmware development required;
- And three, embed the EZ-PD BCR controller into the product, replacing the barrel receptacle with a USB-C receptacle.
The product can then be powered by any USB-C power adapter supporting the desired USB Power Delivery profile, giving the manufacturer the option to allow consumers to use their own USB-C power adapters instead of providing one in-box.
Cypress’ EZ-PD BCR solution complies with the latest USB Type-C and USB PD 3.0 standards. The BCR controller integrates a complete Type-C USB-PD transceiver, a load switch controller with a soft start, all termination resistors required for a USB-C port and system-level ESD protection. The one-chip solution minimizes bill-of-material costs for USB-C power adapters by integrating error amplifiers for constant voltage, constant current and PPS applications, a 30 V regulator that allows direct operation from VBUS, VBUS short protection on configuration channel (CC) pins, gate drivers for high-voltage power FETs, a low side current sense amplifier, and dedicated hardware for legacy charger detection protocols plus system level electrostatic discharge (ESD) protection. Overvoltage and overcurrent circuitry protects systems against power overloads and other faulty operating conditions.
The CYPD3177 EZ-PD BCR controller is now in production in a 24-pin QFN (16 mm2) package. Designers can get started with the EZ-PD BCR Kit (CY4533), which is now available for $25.
Cypress will demonstrate the EZ-PD BCR solution at Embedded World 2019 in Nuremberg, Germany in its stand (#148 in hall 4A) of the Nuremberg Exhibition Center from February 26-28.
www.cypress.com/bcr
www.cypress.com/Type-C
