Test Bench: Peerless by Tymphany Full-Range 2" PLS-50N25AL01-08

The 2” to 2.5” diameter full-range drivers are unquestionably one of the most used transducers in consumer electronics. I asked the folks at Tymphany to send a couple of transducers from their Peerless by Tymphany PLS line of full-range 2” to 3” drivers. I specifically asked for the 2” PLS-50N25AL01-08 neodymium motor full range (reviewed here) as well as the 2.5” PLS-65F25AL01-08 ferrite motor full-range (reviewed separately). This article was originally published in Voice Coil, November 2017.

This Test Bench article examines the CQQ76 ribbon tweeter from BoZhen New Audio Lab. The original device BoZhen sent to Voice Coil in 2013, the CQ76 ribbon tweeter, was portrayed in the company literature as a unique (patent number ZL200820128865.6) ribbon tweeter design. “CQ” is an acronym in Chinese pinyin “Chuan-dao-pian Qu-dong,” which in English means “ribbon loudspeaker based on slice-conducted technology.” This article was originally published in Voice Coil, October 2017.

For this month’s Test Bench article, I examined the 745NEOBe, a pro sound 1.4” beryllium compression driver from Radian Audio Engineering. Radian Audio was founded in 1988 by its president, Dr. Richard Kontrimas, however, Kontrimas has since retired and the company is under new ownership, based in Orange, CA. With more than two decades of success under its belt, Radian Audio is now entering its third decade as a pro sound manufacturer. This article was originally published in Voice Coil, October 2017.

In this Test Bench, I examined the 28W/4878T00, a new 10” (28 cm) subwoofer from high-end OEM Danish driver manufacturer Scan- Speak. Scan-Speak’s 28W/4878T00 has a well-chosen feature set that includes a proprietary cast seven-spoke cast-aluminum frame that has minimal reflection surfaces and is completely open below the spider mounting shelf. Other features include a stiff, lightweight paper sandwich cone—further stiffened by a 3.25” convex coated woven fiber dust cap. This article was originally published in Voice Coil, September 2017.

This month I tested one of Volt Loudspeakers' signature products, the 3” VM752 midrange dome. The VM752’s features include a coated single-piece fabric dome/surround, a FEA-designed ferrite motor structure, and a 75 mm diameter Nomex/Kapton voice coil former wound with round copper wire. A short flare horn is built into the rear-mounted (0.75” depth) faceplate. The VM752 also offers 94 dB sensitivity, and 100 W (AES) rated power handling, has a 200 mm diameter ferrite magnet, with a 2 mm Xmax, and a 500-Hz-to-4-kHz operating range. This article was originally published in Voice Coil, September 2017.

This month, in Voice Coil, read our AISE 2018 Report, Christopher Struck discusses "Efficiency Bandwidth Product for Loudspeaker Drivers," and James Croft reviews a patent originally claimed in 2013 on a Double Coil Speaker design, now granted to Friedrich Reining (Vienna, Austria), on behalf of Sound Solutions International from China. In this month's Test Bench, Dickason examines two 1" compression drivers: a new PEEK diaphragm compression driver from Precision Devices, the PD.CD1N, and the Peerless by Tymphany DFM-2544R00-08. Download your copy now.

Voice Coil magazine welcomed Volt Loudspeakers UK to Test Bench in this edition! The driver tested this month was the hot-off-the-production-line new 2” midrange dome, the VM527. The VM527’s features include a coated single piece fabric dome/surround, FEA-designed ferrite motor structure, a 52 mm diameter voice coil, short flare horn built into the rear mounted faceplate, a 91 dB sensitivity, and 75 W (AES) rated power handling. This article was originally published in Voice Coil, August 2017.

The DFM-2535R00-08 compression driver I examined this month came from Tymphany. This is the first compression driver in the company’s new three model compression driver line from Peerless by Tymphany. The DFM-2535R00-08 has a 1” throat exit diameter and a 1.4” titanium diaphragm with a polyimide surround. This is driven by 35.5 mm diameter voice coil wound with round copper wire on an aluminum former (ASV). This article was originally published in Voice Coil, August 2017.

This Test Bench focuses on a new Wavecor 6.5” subwoofer, the SW168WA01. This subwoofer has a generous feature set that includes a proprietary four-spoke stamped steel frame that is substantially open below the spider mounting shelf due to the eight 15×8 mm rectangular vents, and as part of Wavecor’s Balanced Drive motor format, the SW168WA01 further incorporates an aluminum shorting ring. This article was originally published in Voice Coil, July 2017.

The compression driver I examined here came from B&C Speakers and is the “little brother” to the titanium diaphragm DE1090TN compression driver featured in the August 2016 issue of Voice Coil magazine. As with the DE1090TN, the DE990TN was coupled with B&C Speakers’ ME90 80° × 60° constant directivity horn. The DE990TN has a 36 mm (1.4”) throat diameter and is driven by a titanium diaphragm with a 86 mm (3.4”) diameter voice coil wound with aluminum wire. This article was originally published in Voice Coil, July 2017.