![](https://cdn.xingosoftware.com/audioxpress/images/fetch/dpr_1,w_765,h_383,c_fit/https%3A%2F%2Faudioxpress.com%2Fassets%2Fupload%2Fimages%2F1%2F20200904184329_PSB-Speakers-PWMFamilyWeb.jpg)
When home audio applications call for solutions that traditional designs are not able to fulfill, the new PSB Performance Wall Mount (PWM) speaker range is able to deliver the required level of performance without compromises, regardless of the installation challenges, promises the Canadian loudspeaker company that's part of the Lenbrook Group. Carrying on its longstanding tradition of combining high performance and innovative design, PSB Speakers created the PWM Series with three models, all with a slim profile that maintains a minimal visual presence.
All PWM models have clean and simple lines that complement virtually any design aesthetic. Each of the PWM models is only 3 1/2" deep and 6 1/2" wide and measure 28”, 36” and 48” long for the PWM1, 2 and 3, respectively. A mounting bracket is included with each model and the Satin White or Satin Black finish with a soft magnetic, cloth grille complements any décor. While these models provide a visceral home theatre or music experience on their own, PSB’s in-wall subwoofer options with matching amplifier can be employed, should additional bass performance be desired.
The three new PSB PWM speakers feature a selection of drivers displayed symmetrically, featuring dual layer voice coils with powerful magnets and carbon fiber cones for exceptional detail, low distortion and superior power handling. Centered in each configuration, the new proprietary 1" titanium dome tweeter is ferrofluid cooled and features a Neodymium magnet for high sensitivity and power handling. A waveguide on the front of the tweeter helps match the high-frequency response near the crossover point for a seamless transition with the remaining mid and low frequency drivers.
![](https://cdn.xingosoftware.com/audioxpress/images/fetch/dpr_1,w_765,h_574,c_fit/https%3A%2F%2Faudioxpress.com%2Fassets%2Fupload%2Fimages%2F1%2F20200904184330_PSB-Speakers-PWM2-WhiteNoGrills-onWoodWallWeb.jpg)
Interior designers, architects, builders and system integrators will readily appreciate the elegance and highest performance levels offered by the Performance Wall Mount Series. The entire PSB family of products are tonally balanced providing the flexibility to seamlessly mix and match between on-wall, in-room, in-ceiling and in-wall PSB models to suit the specific requirements of each application.
Beyond the visual appeal and ease of application is a sonic performance which lives up to the PSB heritage. Like all PSB speakers, final voicing is performed by founder and chief designer, Paul Barton, at Canada’s famed National Research Council.
![](https://cdn.xingosoftware.com/audioxpress/images/fetch/dpr_1,w_765,h_403,c_fit/https%3A%2F%2Faudioxpress.com%2Fassets%2Fupload%2Fimages%2F1%2F20200904184330_PSB-Speakers-LivingRoomWeb.jpeg)
"Following up on our long-time success of the PSB W1 on-wall, the PWM Series was conceived based on direct feedback we have received from the CI marketplace”, commented Joe de Jesus, Lenbrook’s Product Manager for Custom Installation. “Whether as part of a complete on wall system, a basic TV application or as an on-wall center channel solution for floor standing speakers; we believe the PWM models will exceed expectations in every way. These three PWM models have been created solely with the professional installer and their clients, in mind”.
www.psbspeakers.com