Kick-off 2018 with audioXpress and The Best in Audio Development and Design!

A great first 2018 issue of audioXpress is now available to download! audioXpress January 2018 reviews the surprising Vanatoo Transparent Zero powered, wireless, and inexpensive speakers. We report on what sounded good at the Rocky Mountain Audio Fest (RMAF) 2017 show, and Robert Nance Dee returns with the 6922 tube hybrid amplifier, a complete design in his series on buffered preamps... and much more!

audioXpress December 2011 introduced readers to Willow, a “proof-of-concept” project featuring a PMBF4393 JFET and HA5002 buffered preamp, built as a companion to the author's 5002 power amp, and the first to use this typology. After considerable positive DIYer feedback, the Willow was revised and updated, and this article, Willow Revisited was published in February 2016.

In this high quality project, Robert Nance Dee designs a potentiometer for accuracy and flexibility. A pot with 64 levels and precision metal film resistors that is hard to beat for sound or facility, as he describes it. The project started with a clean sheet, looking to address potentiometer design with a quality that rivaled existing designs while maintaining a reasonable cost. This article was originally published in audioXpress, September 2011.

I built this amplifier to run my Dynaudio X12 speakers. The X12s are not known for efficiency, but these little mono blocks run the accurate X12s with ease. Don’t be fooled by their low power output. The limiting factor is voltage, not their ability to drive a load. This article was published originally in audioXpress, February 2012.

This month, audioXpress features an updated version of the Willow amplifier, especially designed for the DIY community, and a three-way loudspeaker project with an external active crossover network. We visited Eighteen Sound in Italy, discuss experiments with Dolby Atmos, audio networking development based on Audinate’s Dante technology and learn how to measure Reverberation Time (RT). And if you are interested in recreations of the famous Fairchild compressor/limiters, rectifier tubes, and how to properly test tubes, don’t miss this month’s audioXpress.

This project, originally published by audioXpress in December 2011, has been the topic of much discussion, updates and follow-up projects, so much so that we decided to make it available online. As the author, Robert Nance Dee, explains, “…the people who have listened to this amp can hear the difference. I built it as a companion to my 5002 power amp, both using the HA5002 buffer.”