All items tagged with Modeling (41)

APDA-ALTI Education Symposium 2023. Three Days of Audio Product Knowledge

May 1, 2023 by audioXpress Staff

APDA-ALTI Education Symposium 2023. Three Days of Audio Product Knowledge

The Audio Product Development Alliance (APDA) in association with the Audio & Loudspeaker Technologies International (ALTI) Association, promotes a three day education symposium during the ALTI Expo & Conference 2023, June 11 - 13, 2023 at the DoubleTree by Hilton at the entrance to Universal, Orlando. Three days to improve your knowledge and skills in the development of audio products, from concept to delivery.

ALTI-Expo and Conference 2023. Largest Focused Event for the Loudspeaker Industry and Audio Product Developers

May 1, 2023 by audioXpress Staff

ALTI-Expo and Conference 2023. Largest Focused Event for the Loudspeaker Industry and Audio Product Developers

The traditional Audio & Loudspeaker Technologies International (ALTI) Association annual gathering has long been the highest quality networking event for any audio industry professional, particularly for brands, manufacturers and its suppliers. The upcoming ALTI-Expo and Conference 2023, will be held June 11-12 at the DoubleTree by Hilton at Universal Studios, in Orlando, FL, and will combine a highly focused exhibition with the largest ever conference program for audio product developers.

Hearables, Headphones Testing, Audio Electronics, and More in audioXpress April 2023

March 10, 2023 by audioXpress Staff

Hearables, Headphones Testing, Audio Electronics, and More in audioXpress April 2023

Want to understand what's ahead in the most revolutionary audio product category of the 21st century? Read the State of the Hearables Industry Market Update. And for product developers and manufacturers, there's also a Headphones Test and Measurement report. Burkhard Vogel discusses op-amp noise in simulated models, Bruce E. Gillingham offers a complete monoblock power amplifier project, and René Christensen writes about acoustic topology optimization. And so much more....

Beyma Introduces Innovative Solutions for Next-Generation Compression Drivers

February 6, 2023 by Joao Martins

Beyma Introduces Innovative Solutions for Next-Generation Compression Drivers

The brand new generation of Beyma compression drivers originates from an intense R&D effort and two patent-pending innovations. Unveiled at ISE 2013, Beyma's four base designs with 2 throat sizes, 4 voice coil diameters, 3 diaphragm materials and 2 magnet types, allow for a total of 12 new models (for now). Scheduled to be launched progressively during 2023, these new Beyma state-of-the-art high frequency transducers deliver new exciting possibilities for speaker designs.

New COMSOL Multiphysics Version 6.1 Reinforces Transducer Design for Audio Products

November 1, 2022 by Joao Martins

New COMSOL Multiphysics Version 6.1 Reinforces Transducer Design for Audio Products

COMSOL announced the release of the latest version of its modeling and simulation software. COMSOL Multiphysics version 6.1 including expanded capabilities in Fluid and Mechanical Simulations. The Acoustics Module in version 6.1 includes several important new possibilities for electroacoustic simulations, including acoustic streaming, and lumped speaker boundary conditions for thermoviscous acoustics.

Cadence and Dassault Systèmes Partner on Electronic Systems Development

February 23, 2022 by Joao Martins

Cadence and Dassault Systèmes Partner on Electronic Systems Development

A partnership between Cadence and Dassault Systèmes intends to leverage the Cadence Allegro platform and the 3DExperience SolidWorks CAD software platform to optimize electromechanical systems modeling, design, simulation and product lifecycle management. The two companies are determined to accelerate innovation and time-to-product realization by improving modeling, simulation, virtual twin experiences, collaboration, manufacturing and supply chain execution.

Second Modeling and Measurement Webinar on Designing Audio Devices With Digital Twins Scheduled for October 27

October 21, 2021 by Audio Engineering_Society

Second Modeling and Measurement Webinar on Designing Audio Devices With Digital Twins Scheduled for October 27

The AES Audio Product Education Institute (APEI) continues to explore the practice and benefits of simulation-driven audio architecture design. In the second Modeling and Measurement webinar in this series (October 27, 12pm EDT), experts from COMSOL, JJR Acoustic and Facebook, will describe and detail a real virtual architectural design story. Registration for this webinar is now available.

New APEI Webinar Addresses the Use of Digital Twins for Architecting and Designing Audio Devices

September 16, 2021 by Audio Engineering_Society

New APEI Webinar Addresses the Use of Digital Twins for Architecting and Designing Audio Devices

The AES Audio Product Education Institute (APEI) promotes a new webinar series on its Modeling and Measurement education pillar to explore the use of Digital Twins as a new simulation-driven audio architecture design. With audio development of increasingly sophisticated audio products now starting almost always with the creation of digital models, the possibilities to adjust practices between different teams are driving new audio product development practices.

AES Audio Product Education Institute Explains Simulation and Testing for Speakers and Microphones

August 6, 2021 by Audio Engineering_Society

AES Audio Product Education Institute Explains Simulation and Testing for Speakers and Microphones

The AES Audio Product Education Institute (APEI) will promote a new free webinar on its Modeling and Measurement education pillar, this time addressing “Speakers and Microphones: Simulation and Testing,” on Wednesday, August 11 (12:00pm EDT). This webinar will feature presentations from COMSOL, and HEAD acoustics exploring spatial responses of speakers and microphones, and echo cancellation testing techniques.

AES Audio Product Education Institute Presents “Modeling and Measurement of True Wireless Stereo (TWS) Wearables”

July 16, 2021 by Audio Engineering_Society

AES Audio Product Education Institute Presents “Modeling and Measurement of True Wireless Stereo (TWS) Wearables”

The AES Audio Product Education Institute (APEI), created to promote methodologies, practices and technologies involved in developing and bringing audio products to market, is producing a free webinar focused on True Wireless Stereo (TWS) design on Tuesday, July 20 (12:00pm EDT). This webinar will focus on the fastest-growing category in consumer electronics with presentations from COMSOL, Listen, and JJR Acoustics detailing modeling, simulation and measurement of true wireless earbuds.

«
1
2
3
4
5
»