![](https://cdn.xingosoftware.com/audioxpress/images/fetch/dpr_1,w_765,h_574,c_fit/https%3A%2F%2Faudioxpress.com%2Findex.php%2Fassets%2Fupload%2Fimages%2F1%2F20200122163048_MIPI-13C-V11SpecWeb.jpg)
“Delivering a dramatic speed increase and a host of new features to enhance reliability, MIPI I3C v1.1 significantly strengthens the upgrade path for I2C implementers and enables many different use cases across mobile and multiple other markets including automotive, PC clients, data centers, drones, industrial and the Internet of Things (IoT),” says Joel Huloux, chairman of MIPI Alliance. “The specification is ideal for system-level implementers seeking a low-cost, off-the-shelf standardized utility bus solution with a small printed circuit board (PCB) footprint and a well-defined and readily available ecosystem of peripherals, sensors and applications.”
Relying on a lower number of pins and the smallest amount of PCB real estate compared with other bus solutions, MIPI I3C integrates mechanical, motion, biometric, environmental and any other type of sensor. The new version builds on those capabilities with new features for peripheral command, control and communication to a host processor over a short distance.
For instance, MIPI I3C v1.1 provides for extensible use of extra bus lanes to increase the interface speed to near 100 MHz, future proofing the interface for rising speed requirements. The greater speed support and a host of new features — grouped addressing, enhanced error detection/recovery, slave reset, comprehensive flow control, outside end transfer and new command, control and communication (CCC) capabilities — work together to enable a diverse set of new applications.
According to the MIPI Alliance, MIPI I3C v1.1 addresses directly the application needs for DIMM5 memory control, “always-on” imaging systems, server manageability, debug application communications, touchscreen command and communications, sensor device command, control and data transport, or power management.
“In developing MIPI I3C v1.1, the working group relied on input from real-world market experiences to put in place what was missing and deliver the final capabilities to enable I2C implementers to move to I3C,” says Ken Foust, MIPI I3C Working Group chair. “As we look at the next evolution of MIPI I3C, the working group will be considering a range of new capabilities, including longer reach, various specification development improvements, more automotive requirements, speed increases, new multi-lane uses, new PHY approaches, standardized connectors and other feature refinements.”
MIPI will host a webinar on February 12, 2020, at 8 am Pacific to further explore the features and benefits of MIPI I3C v1.1 and provide an update on the I3C ecosystem. To register, please visit http://bit.ly/2t56SVD.
In addition, a variety of other system-solution resources have been introduced to aid developers and support the I3C ecosystem. These include MIPI Discovery and Configuration (MIPI DisCo) for I3C, a software framework designed to simplify software integration of sensors and other peripherals that use the MIPI I3C device interface, by allowing major operating systems to identify MIPI-conformant external devices in mobile and mobile-influenced systems and automatically implement drivers for them.
The MIPI I3C Host Controller Interface defines a common set of capabilities for the host controller and the software interface. An update to the interface to support v1.1 is currently in development.
Another important resource is MIPI Debug for I3C, a bare-metal, minimal-pin interface in development for transporting debug controls and data between a debug and test system (DTS) and target system (TS), is targeted to be released later in 2020.
MIPI I3C interoperability workshops and MIPI DevCon will offer opportunities to explore device compatibility and learn more about I3C and other MIPI specifications.
![](https://cdn.xingosoftware.com/audioxpress/images/fetch/dpr_1,w_765,h_510,c_fit/https%3A%2F%2Faudioxpress.com%2Findex.php%2Fassets%2Fupload%2Fimages%2F0%2F20150822124025_MIPIAllianceFrontWeb.jpg)
A number of information resources, such as FAQs, an Application Note, and a Conformance Test Suite (CTS), are being developed to include v1.1 and will be published by MIPI Alliance.
Founded in 2003, the MIPI Alliance (MIPI) has over 300 member companies worldwide and 14 active working groups delivering specifications within the mobile ecosystem. Members of the organization include handset manufacturers, device OEMs, software providers, semiconductor companies, application processor developers, IP tool providers, automotive OEMs and Tier 1 suppliers, and test and test equipment companies, as well as camera, tablet and laptop manufacturers.
www.mipi.org