You Can DIY! The Live-Edge Dipoles

For the speaker builders, Perry Marshall details everything there is to know about his beautiful Live-Edge Dipoles project. A design that was inspired by two slabs of birch the author brought home, allowing to finally bring to fruition his idea to build these dipoles. Marshall reveals all the specifics of the driver choices, radiation pattern, and crossovers, while explaining the effects of the obtained radiation pattern and how the speakers behave in practice. This article was originally published in audioXpress, January 2021.

Vented systems are in chronic overload. This article shows how, by applying low-cost digital signal processors (DSPs) to passive radiators, you can extend bass an octave below what is normally considered practical. At the same time you can increase power handling and maximum output, and squeeze high performance from tiny systems. We all know reflex systems are more efficient and offer deeper bass than sealed systems. However, the vast majority still fall short of their potential by 6 to 12 dB or more. Worse yet, often people don’t realize how vulnerable drivers are to damage. Many abuse woofers without knowing it. Few realize how much more sound output is possible from a DSP Assisted Reflex design.