Find Solutions for Different Speaker Designs in Voice Coil September 2021

In Voice Coil September 2021, Vance Dickason writes about DSP crossovers from Danville Signal, Joe Hayes (Vastigo) writes about the DaS AuReality patented 3D loudspeaker technology, and Mike Klasco finds speaker-related technologies that help support smart speaker design efforts. This edition's Test Bench characterizes three new 25mm high-frequency tweeters from BlieSMa, using silk, beryllium, and diamond domes: BlieSMa’s T25S-6, T25B-6, and T25D-6.

The driver to be characterized in this article is Wavecor’s FR070WA05, a 2.75" full-range driver with a black anodized aluminum cone, built on a proprietary injection-molded polymer four-spoke frame. Like most contemporary drivers, the area below the spider mounting shelf is totally open for increased cooling. Powering the cone assembly is a dual neodymium motor. This article was originally published in Voice Coil, February 2021.

In this Test Bench, the focus is the Dayton Audio DMA58-4, a new 2" full-range line array/smart speaker from Dayton Audio. DMA stands for Dual Magnet Aluminum Cone and the series already includes five models of full-range drivers, all using a proprietary 12-spoke injection-molded frame. This frame is very open to reduce reflections back into the cone and also has a very generous mounting flange making multiple driver arrays cosmetically attractive and compact. This article was originally published in Voice Coil, December 2019.

Compact 1” to 2.5” diameter full-range drivers (micro speakers) are unquestionably one of the most used transducers in consumer electronics. They are finding broad applications in smart speakers, soundbars, and portable Bluetooth speakers. This Test Bench examines the FSB611015-1400 neodymium full-range driver from Eastech's "designed in Denmark" Punktkilde line. This is a 1.5” diameter 4 Ω driver built on a proprietary stamped frame that is fully vented below the spider mounting shelf. This article was published originally in Voice Coil, November 2018.

Following the review of the Peerless by Tymphany PLS 2” PLS-50N25AL01-08 neodymium motor full range, in this edition of Test Bench I reviewed the 2.5" PLS-65F25AL01-08 ferrite motor full-range model. This 2.5" 8 ohm full-range member of the PLS family, the Peerless PLS-65F25AL01-08, has some differences. Unlike the PLS-50N plastic frame, the PLS-65F is built on a proprietary stamped steel frame that is fully vented below the spider mounting shelf with four 24 mm × 4 mm cutouts for enhanced cooling. This article was originally published in Voice Coil, November 2017.

The 2” to 2.5” diameter full-range drivers are unquestionably one of the most used transducers in consumer electronics. I asked the folks at Tymphany to send a couple of transducers from their Peerless by Tymphany PLS line of full-range 2” to 3” drivers. I specifically asked for the 2” PLS-50N25AL01-08 neodymium motor full range (reviewed here) as well as the 2.5” PLS-65F25AL01-08 ferrite motor full-range (reviewed separately). This article was originally published in Voice Coil, November 2017.