All items tagged with DIY audio (44)

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements (Part 7) - Pitting the CLIO Pocket Against a Sound Card

May 24, 2017 by Stuart Yaniger

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements (Part 7) - Pitting the CLIO Pocket Against a Sound Card

In this article of a series on how to create a low-cost system for lab-grade audio electronics measurements, Stuart Yaniger decided to do a comparison experiment between a dedicated but very affordable measurement solution - the Audiomatica CLIO Pocket - and its own sound-card based system described previously. This article was originally published in audioXpress, December 2015.

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements (Part 6) - Measurement Examples

May 17, 2017 by Stuart Yaniger

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements (Part 6) - Measurement Examples

Stuart Yaniger continues to examine ways to create a low-cost system for lab-grade audio electronics measurements. In this article, a few measurement examples are used to illustrate the power and the versatility of sound-card-based measurements. To illustrate the usefulness of measurements in the design process, Yaniger also explores the effects of load on power supply noise for a common IC regulator circuit. This article was originally published in audioXpress, November 2015.

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements (Part 5) - The User

May 10, 2017 by Stuart Yaniger

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements (Part 5) - The User

In this article series, Stuart Yaniger examines ways to create a low-cost system for lab-grade audio electronics measurements. The first four articles in the series looked at the hardware and software bits of the sound-card based measurement system. The last remaining piece is the user and the need to choose the right measurement parameters. This article was originally published in audioXpress, October 2015.

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements (Part 4)

May 3, 2017 by Stuart Yaniger

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements (Part 4)

In this article series, Stuart Yaniger examines ways to create a low-cost system for lab-grade audio electronics measurements. The pieces of a powerful modern measurement system comprise a sound card, software, and a signal conditioning interface and, of course, the right computer. In this fourth article in the series, the author looks at selecting the right interface. This article was originally published in audioXpress, September 2015.

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements (Part 3)

April 26, 2017 by Stuart Yaniger

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements (Part 3)

In this article series, Stuart Yaniger examines ways to create a low-cost system for lab-grade audio electronics measurements. The pieces of a powerful modern measurement system comprise a sound card, software, and a signal conditioning interface and, of course, the right computer. That’s where Yaniger delves in this third part, also sharing some of his first findings on available software. This article was originally published in audioXpress, August 2015.

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements (Part 2)

April 19, 2017 by Stuart Yaniger

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements (Part 2)

In this article series, Stuart Yaniger looks at some of the available options and methods to create a low-cost system (emphasis on “low-cost”) for lab-grade audio electronics measurements and provides some examples. In this second part, Yaniger starts by examining sound card requirements and the criteria to decide what features to look for in a sound card targeted for audio measurement. This article was originally published in audioXpress, July 2015.

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements

April 13, 2017 by Stuart Yaniger

Practical Test & Measurement: Sound Cards for Data Acquisition in Audio Measurements

Part 1 of an article series that looks at some of the available options and methods to create a low-cost system (emphasis on “low-cost”) for lab-grade audio electronics measurements. Focusing on solutions within easy reach of budget-conscience hobbyists, the goal is to demonstrate how you can generate useful data, similar to the graphs and charts in the audio review magazines, but without the expense. A great test and measurement article series by Stuart Yaniger, which started to be originally published in audioXpress, June 2015.

RaspTouch Open Source Audio Player Combines Raspberry Pi 3 and ESS Sabre DAC

July 18, 2016 by audioXpress Staff

RaspTouch Open Source Audio Player Combines Raspberry Pi 3 and ESS Sabre DAC

There are all sorts of projects on Kickstarter, including those for electronics and DIY audio enthusiasts. French company Audiophonics has successfully funded a combination of both, leveraging the Raspberry Pi 3 and ESS Sabre DACs in its RaspTouch Open Source high-end audio player and DAC with touchscreen. Those interested still have three days left to pledge for one of the available options on Kickstarter, from the simple aluminum chassis to a complete kit and top ES9018K2M output DAC.

Burson Audio Launches Supreme Sound Audio Division for DIY and OEM Components

September 8, 2015 by audioXpress Staff

Burson Audio Launches Supreme Sound Audio Division for DIY and OEM Components

Australian company Burson Audio has recently launched its dedicated components division, Supreme Sound Audio, for DIY and OEM products. The manufacturer of USB DAC and amplifiers has also launched the new SS Lycan Op-Amp Test Bench, Headphone Amp and Preamp device on its brand new Supreme Sound Audio website.

A Versatile Line Amp for Preamp, Headphone, and Power Use

February 27, 2015 by Joseph Norwood Still

A Versatile Line Amp for Preamp, Headphone, and Power Use

Here’s a do-it-yourselfer’s dream in tube amp design: four operating modes, high quality, low cost, and low distortion. An article originally published by audioXpress in May 2007. A true versatile project which we think deserves to be shared.

«
1
2
3
4
5
»