![](https://cdn.xingosoftware.com/audioxpress/images/fetch/dpr_1,w_765,h_574,c_fit/https%3A%2F%2Faudioxpress.com%2Findex.php%2Fassets%2Fupload%2Fimages%2F1%2F20180530114232_MartinAudio-THSeriesWeb.jpg)
The Hybrid low frequency section comprises a horn-loaded 15” (380mm)/4” (100mm) voice coil driver that is reflex-loaded to extend the LF output to below the natural horn cut-off point. The LF driver features a water-resistant cone and triple roll surround for increased excursion.
The mid-horn has a unique ‘phase-ball’ loading device which maintains the constant directivity characteristics of the horn at the upper end of its range. It is driven by a 10” (250mm) midrange driver with an aluminum demodulating ring for improved high-mid clarity and reduced distortion when driven hard. The 70˚ x 40˚ HF section features a neodymium 1” (25mm) exit compression driver with a Kapton diaphragm for high sensitivity and extended HF performance.
The internal mid/ high passive crossover allows these three-way systems to be driven in a bi-amp configuration with the Martin Audio iK42 being the recommended amplifier partner, with the DX range of controllers also compatible.
“TH Series is an important addition to our growing portfolio, offering a high powered solution with modern styling that will help continue our market share gains in the install market,” states Dom Harter, Managing Director of Martin Audio.
The new TH Series will start shipping at the end of June 2018.
www.martin-audio.com/products/series/th