![](https://cdn.xingosoftware.com/audioxpress/images/fetch/dpr_1,w_765,h_574,c_fit/https%3A%2F%2Faudioxpress.com%2Findex.php%2Fassets%2Fupload%2Fimages%2F1%2F20201222113938_Focusrite-Red8line-FrontWeb.jpg)
On its professional division, British company Focusrite recently teased the industry with four upcoming products, of which the Red 8Line was clearly the highlight - as a new addition to the brand's Red range of Pro Tools HD, Thunderbolt 3 and Dante audio interfaces for Mac and PC. This new model is currently the most versatile and future-proof choice for professionals who work in Pro Tools HD and other DAWs — on both Mac and PC, thanks to the Windows 10 drivers for Thunderbolt 3-equipped PC users.
With mini-DigiLink the Red 8Line helps Pro Tools users not to get limited by the options available in Avid's own interfaces. And adding Thunderbolt 3 plus Dante connections, the Red 8Line offers a long-term solution particularly for commercial studios, by offering the best computer interface available at the local lever, combined with all the possibilities of audio networking multiple studios, or even remote studio facilities with AoIP. And the Red 8Line also makes it possible to instantly switch between Pro Tools, other DAW applications, and a vast world of Audio-over-IP solutions. Users can simply change the host mode either in RedNet Control software, or using a button on the Red 8Line front panel, to change DAWs in seconds.
![](https://cdn.xingosoftware.com/audioxpress/images/fetch/dpr_1,w_765,h_543,c_fit/https%3A%2F%2Faudioxpress.com%2Findex.php%2Fassets%2Fupload%2Fimages%2F1%2F20201222114149_Focusrite-rednetr1-front-rearWeb.jpg)
And very interestingly, they can pair the Red 8Line with the new RedNet R1 desktop remote controller (picture above), which Focusrite also announced to be available soon. This new controller enables users to interact with their audio interfaces, control a range of different monitor output setups, ranging from mono through to 7.1.4 surround, including Dolby Atmos and other immersive audio workflows. And RedNet R1 even features a Dante-enabled talkback section, an internal mic and an XLR input for connecting an existing microphone, and a high-powered headphones output.
Apart from the two built-in Red Evolution mic preamplifiers, the Focusrite Red 8Line Thunderbolt 3 audio interface can be connected to further external microphone preamps and offers independent L/R monitor outs, eight balanced line analog inputs and outputs; up to 58-in, 64-out DigiLink I/O; 32 channels of Dante I/O; 16-channel ADAT input and output (at 48kHz), and stereo S/PDIF input and output. As with other Red interfaces, Red 8Line features professional-grade 24-bit/192kHz A-D and D-A conversion for recording and audio playback.
The Focusrite Red 8Line features the latest implementation of Thunderbolt 3, complemented with the company's own ultra-low-latency Thunderbolt drivers and providing the flexibility to use software plug-ins in real time, for processing or running virtual instruments. With two Thunderbolt 3 ports as standard, it's also possible to daisy-chain Thunderbolt devices, such as third-party plug-in accelerators, hard drives, external 4K displays, processing units and Thunderbolt hubs.
On-board Dual Dante ports enable connection to the industry-standard AoIP protocol, for easy expansion and interoperability with the Focusrite RedNet family of interfaces and with AoIP equipment from hundreds of manufacturers including Neve, Yamaha and DiGiCo. Twin mini-DigiLink ports provide connectivity directly to Pro Tools HD cards, with no need for device expansion. Digital synchronization is facilitated by Loop Sync and Word Clock I/O.
The two Red Evolution remote-controllable microphone preamps provide up to 63dB of ultra-clean gain, with phantom power, high-pass filter, phase reverse and the famous Air mode, which lets users invoke the sonic signature of Focusrite’s classic transformer-based ISA Preamp. Dual front-panel instrument connections ensure immediate access for DI input, even when racked.
In the front panel, three color LCDs provide highly accurate level metering for any input or output block, as well as for main monitor and headphone outputs in addition to parameter display. And the Focusrite Red 8Line is accompanied by a software bundle that includes the Brainworx bx_console Focusrite SC channel strip from the original Focusrite Studio Console, plus Red 2 and Red 3 EQ and Compression plug-ins which accurately reproduce the sonic qualities of the original Red hardware.
![](https://cdn.xingosoftware.com/audioxpress/images/fetch/dpr_1,w_300,h_197,c_fit/https%3A%2F%2Faudioxpress.com%2Findex.php%2Fassets%2Fupload%2Fimages%2F0%2FThunderbolt-logo.jpg)
And Focusrite also made available new Windows 10 Thunderbolt drivers to make its Red 8Line compatible with PC-based audio systems equipped with Thunderbolt 3. In fact, with these Windows 10 drivers the complete Focusrite Red range of Thunderbolt, Pro Tools HD and Dante interfaces ((Red 4Pre, Red 8Pre, Red 8Line and Red 16Line), is supported for the first time. Red interfaces are Thunderbolt devices that feature direct connectivity to both Pro Tools HD and Dante audio environments as standard, without the need for option cards or hardware upgrades. All Windows 10 Thunderbolt drivers for Red range are available to download now.
http://pro.focusrite.com