Acroname Launches First Programmable USB Type-C Hub Designed for USB-PD Debug and Validation

July 22 2021, 00:30
USB Specifications, unified by products using a USB Type-C connector, commonly called USB-C, promise standardized power and data delivery. Unfortunately, poorly tested devices in the market can make USB-C systems unpredictable, expensive, and frustrating to consumers. Improving USB-C testing is critical to delivering on the “one connector to rule them all” promise of USB-C. Acroname's new USBHub3c makes testing USB-C devices easier, safer, and cheaper.
 

The USBHub3c is a programmable USB-C hub, Power Delivery analyzer, and tester. It is designed specifically for mobile device test labs, USB-PD validation testing, USB-C device production testing, end-of-line battery-charging, and for testing dual role data (DRD) and dual role power (DRP) devices.

This is a fully programmable solution, so engineers can control USB-PD profiles, real-time measurements, and USB connectivity. And USBHub3c is the only USB-C hub with AnyPort, which allows all ports to be fully functional, 100W capable, upstream (UFP) or downstream (DFP) ports.

“We built the Acroname USBHub3c to be the most capable and reliable USB hub in the world. We then bolted on the advanced power-delivery analyzer and debug and validation tools,” says Justin Gregg, Acroname’s chief executive officer. “It is optimized for manufacturing and validation environments. And it is the perfect solution to mitigate overcharging in large mobile device test labs.”

Acroname was founded in 1994 and is based in Boulder, Colorado. In 2015, Acroname invented the programmable USB hub concept. Building on top of this concept, the USBhub3c ports can be enabled and disabled independently, and each functional signal group can be independently controlled. Each port can also be dynamically configured for upstream or downstream data at speeds up to 10Gbps, and the USBHub3c will also report established link speed.  
 

A robust and user-programmable power budgeting system allows the USBHub3c to be the only bus-powered USB hub that supports PD sourcing. The power budgeting system also allows engineers to fine-tune power sourcing when connected to high-current sink devices. For USB-PD validation applications, it offers the ability to automate cable “flipping” with manual interaction, edit USB-PD power data objects (PDOs), and override voltages and current limits. All programmable features are controlled with simple, robust APIs in Python, C, C++, .Net, and LabVIEW.
 
“Our vision was to create a USB-C hub that made automated testing easier, predictable, safer, and cheaper than anything on the market,” Gregg adds. “Our talented engineering team was successful. Life just got easier for test engineers working with USB-C devices.”
www.acroname.com
 
related items